HIS HIKRA® SOL Red Stripe 6mm Cable

Construction

Strand construction

Tin-plated copper strand (electrolytic copper), fine wire acc. IEC 60228 Class 5

Insulation

Electron-beam cross-linked Polyolefin; Shore hardness D 32

Outer Sheath

Electron-beam cross-linked special compound XLPO; Shore hardness D 36

Colour

Sheath: black, red; Insulation: clear – naturally colored

Making

HIKRA SOL1500V H1Z2Z2-K IEC62930 1x6,0 mm² R 50408873 CE with meter marking

Standards

EN50618 (H1Z2Z2-K) TÜV R50363076; IEC62930 131 TÜV 50408873

Technical characteristics

Nominal voltage

1,5kV DC and 1,0kV AC

Maximum permitted operating voltage:

1,8kV DC (2,0 kV DC internal examination)

Voltage test on complete cable

6,5kV AC / 15kV DC (5 minutes water bath, 20±5 °C)

Current carrying capacity

See document „Current rating – HIKRA® Solar Cable“ October 2020

Short-circuit-temperature

250 °C/5s

Material properties

UV stability

Tensile strength and ultimate-elongation after 720 h (360 cycles) ≥ 70 % of initial values; EN 50289-4-17 acc. Method A; EN ISO 4892-1 (2000) and EN ISO 4892-2 (2006)

Ozone resistance

72h, relative humidity 55±5 %, Temperature 40±2 °C (EN 50396 Method B; Ozone concentration (200±50)x10-6 )

Insulation resistance

Insulation resistance in water bath, each 2h at +90 °C and 2h at 20 °C (Limit values acc. EN 50618 Table 1)

DC direct voltage test

Water bath, at +85 °C +-5 °C, 240h, test voltage 1.8kV DC

Advanced DC dc voltage test

Water bath, at +85 °C +-5 °C, 240h, test voltage 3.6kV DC (Floating PV TÜV 2 Pfg 2750)

Capacity measurement water storage

14 days water storage at +90+-5 °C; capacitance measurement after 1 day. After 14 days capacity measurement max. 10 %, resp. after 7 days 4 % higher than compared to capacity measurement after day 1 (Floating PV TÜV 2 Pfg 2750).

Dynamic penetration test

Spring-steel-needle through insulation or sheath (EN50618 Annex D)

Direct burial

Long-term water immersion at 90 °C, duration 12 weeks; Insulation resistance ≥ 3GΩ

(internal examination acc. UL44 cl. 5.4 & UL2556 6.4.4.2.1

Crushing- and impact-resistance

Impact-Resistance UL 854.23 and Crushing-Resistance UL 854.24 (internal examination)

Sheath resistance against acid and alkaline

168h at 23 °C in N-Oxal acid and N-Sodium hydroxide (EN 60811-404); ammoniac-resistant

Behavior in case of fire

Flame-retardant acc. EN 60332-1-2 Annex A, low smoke emission (EN 61034,-2)

CPR-Performance

Dca; burning behavior acc. EN 50575:2014

Halogen-free

EN 50525-1, Annex B

Cold impact test

EN 60811-506, EN 50618 Annex C.1 at -40 °C

Cold elongation test

Max. 30% elongation at -40±2 °C, 16h (EN 60811-505)

Damp heat test

Duration 1000h at 90 °C and min. 85 % relative humidity (EN 60068-2-78)

Minimum bending radius flexible / fixed

10x cable diameter | 4x cable diameter

Temperature Range

Temperature

Ambient temperature: -40 °C to +90 °C; Maximum conductor temperature: +120 °C

Maximum storage temperature

+40 °C

Minimum temperature for installation

-25 °C

Order No.

Cross-section

mm²

Construction

n x max. - Ø (mm)

Max. resistance

(Ω/km)

External diameter

(+/- 0,2 mm)

Copper index

kg/km

Approx. Weight

kg/km

Black

Red stripes

739065

739066

1 x 1.5

29 x 0.25

13.7

4.6

14.0

32.0

738609

738610

1 x 2.5

47 x 0.25

8.21

5.0

24.0

41.0

738613

738614

1 x 4.0

52 x 0.3

5.09

5.4

38.4

54.0

738615

738616

1 x 6.0

78 x 0.3

3.39

6.0

57.6

73.0

738617

738618

1 x 10.0

77 x 0.4

1.95

7.2

96.0

120.0

738619

-

1 x 16.0

126 x 0.4

1.24

8.7

153.6

189.0

739061

-

1 x 25.0

190 x 0.4

0.795

10.4

240.0

277.0